The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches\u001D or more
Bar adapter that allows you to run RoundBar on StreamLine Towers.
Loading your boat has never been easier than this! Two front and two rear saddles with integrated rollers will have you and your friends on the water in no time. The spring-loaded base automatically adjusts to boat when loading. - Mounts to any bar type without tools, making installation a cinch. easy loading Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory and aerodynamic bars Spring-loaded base automatically adjusts to boat when loading - Smooth molded pad hugs and protects multiple boat types - Tilting paddle technology to accommodate an array of boats and roof rack systems - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lbs Minimum crossbar spreads of 24\u001D or more
Heavy-duty aluminum load bars with a unique tri-slot design for fitting of multiple accessories. - Flexible tri-slot design allows use of a range of load accessories independently or in combination - Upper and rear T-tracks are for fast installation/removal of accessories, lower T-track is for connection to roof - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 175cm = 69-inch - 200cm = 79-inch
One person can load and unload a boat with this unique retractable arm that fits inside your Thule load bars. - Supports up to 50% of the kayaks weight and prevents vehicle contact - Integrated load stop prevents boat from sliding off bar - Holds nearly every kayak shape and size - Fits Thule square bar rack system only
Transport you kayak safely with these custom designed saddles that conform to the most popular hull shapes. - Integrated rubber pads protect the hull and help hold the kayak in place for transportation - Carries 1 kayak and requires 1 person to load and unload - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak
Maximize your kayak carrying ability with The stacker. It can hold up to 4 kayaks stacked on their side taking up the least amount of roof space. - Fold-down steel design with non-scratch outer coating - Quick on/off hardware ensures fast installation and removal - Optimally sized carrier leaves roof space for other Thule accessories - Carries up to 4 kayaks and requires 1 to 2 people to load and unload them - Includes straps to transport 2 kayaks - 1 to 4 carriers per vehicle - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak
Thule's easiest loading canoe carrier with universal roof-rack compatibility - Durable gunwales with ramped sides provide easy loading - Cushioned weather-resistant base padding protects canoe during transit -Strong, durable load straps with buckle bumpers protect car and canoe from scratches - FlipFit bracket fits all Thule Rack Systems, round bars and most factory racks with single reversible mounting bracket - Includes all load straps and bow/stern ratcheting Quick Draw tie-downs necessary to easily secure one canoe
Telescoping-width SUP and surfboard carrier with built-in board protection and universal roof-rack compatibility. - Exclusive telescoping design delivers a custom fit for board widths up to 34" wide - Dual loading design allows for transport of up to two boards with maximum stability. - Strong, durable load straps with adjustable wrap-around padding on straps protect board from strap abrasion - Cushioned weather-resistant base padding protects both SUP and surfboards during transit - FlipFit bracket fits all Thule Rack Systems, round bars and most factory racks with single reversible mounting bracket
$165.00 - $185.00
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Getting your gear onto your rack isnt complete until youve secured it. This pair of super strong box-stitched 16 straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
Innovative kayak carrier that is safe, stylish, easy to use, and integrates seamlessly with Thule roof rack systems. Features - Quickly raise or fold when not in use using the convenient front release handle - Easily manage load straps while strapping down the kayak using the integrated StrapCatch - Kayaks are protected during transit due to the durable and soft rubber padding - Theft resistant design keeps carrier securely attached to load bars (locks included) - Easy to install directly into the Thule WingBar Evo or AeroBlade T-track, or around Thule SquareBar via the integrated, tool-free mounting hardware (SquareBar requires an adapter) Technical specifications - Load capacity: 75 lb - Dimensions: 18 x 8 x 17.5 in - Weight: 15.2 lb - Rubber cover for strap buckle - Lockable - One Key System compatible Fits the following Thule crossbars: - WingBar Evo - AeroBlade Edge - AeroBlade - SquareBar (Adapter/s required: Thule SquareBar Adapter 4-pack) - ProBar - Xsporter Pro
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
$94.99 - $99.99
Thule says their Fairing is a stylish roof-rack accessory that decreases noise and wind resistance. But we both know what you'll use it for: plastering it with all your stickers. That's okay, we do the same thing. This polycarbonate shield fits both square and Rapid Aero crossbars (sold separately), comes in several widths to fit a wide range of vehicles, and is built for rigidity to alleviate wind-slap.
$199.95 - $199.99
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
With an iron grip, Thule's Rapid Crossroad turns factory-installed raised rails into a versatile multipurpose rack system. The streamlined, seamless look is achieved with the aero Rapid aluminum load bar. But these aren't just sleek looking, the aero design cuts down on wind resistance and noise. Your car's rails are fully protected thanks to the integrated rubber lining. And you get maximum rack strength and a custom fit from the rubber-coated steel straps.
Thule's Wheel On solves the problem of where to put your front wheel when your bike is on your roof rack. Plus, it helps keep the inside of your car clean, too.
$63.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Add even more cargo space to your pickup with Thule's Xsporter Pro Multi-Height Aluminum Truck Rack. This system attaches to the sides of the pickup bed, creating a whole other level of gear storage and rack options. Superior aerodynamics reduce drag and improve your fuel efficiency while Thule's WindDiffuser technology offers super quiet on-the-road performance. All-aluminum construction resists rust and provides high strength, so you'll get a lifetime of hard use out of this rack. The system also includes four matching lock cylinders to secure your gear.
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
Fitting kit required for perfect fit of the roof rack to a specific car.
Upright bike carrier for the quickest, most convenient mounting – for bikes up to 44 lbs. - 2 One Key lock cylinders (sold separately) lock the bike to carrier and carrier to rack. - Mounts to all Thule rack systems, round bars and most factory racks - Automatically positions your bike when you secure it, thanks to the uniquely designed frame holder and wheel tray - Quick and easy bike securing – the torque limiter dial controls the force going into the bike frame with a clear sign of correct mounting - Pressure is spread via large, soft claw pads that adapt to your bike’s frame tubes – minimizing the risk of frame damage - Safe mounting – your bike is prevented from falling thanks to the claw’s extended lower jaw - Stable wheels – firmly fixed in smartly designed wheel holders with diagonal quick-release wheel straps - Easy, tool-free interface for switching carrier from one side of your car to the other.
Thule’s UpRide is a universal upright bike rack with no frame contact, providing fast and secure mounting and maximum frame protection. - Ratcheting wheel strap quickly secures back wheel to tray - Maximum bike weight up to 20 kg. - No bike frame contact is made as the hook securely grabs the front wheel Suitable for bikes with carbon frames - Versatile design accommodates bikes with non-traditional frame designs, rear suspension, and bottle cages - Simple interface for switching carrier from one side of your car to the other - Fits most 20–29” wheel bicycles with tires up to 3" wide (up to 5” with Thule UpRide Fatbike Adapter, sold separately) - Locks the bike to the bike rack and the bike rack to the vehicle (locks sold separately)
Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), plus the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). All mount without tools, are vinyl-coated so they can't damage your 4-wheeler, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.
Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.
Thule's Force XL Rooftop Box significantly increases the carrying capacity of any vehicle. This great rooftop box is accessible from either side of the vehicle and it's easy to make sure the box is closed securely and properly with the Force's oversize SecureLock latch. The Force also includes tool-free Quick Grip mounting hardware that fits on Thule crossbars (sold separately), plus most after-market and factory-installed racks. • Diamond-Textured AeroSkin Lid is durable and the aerodynamic shape helps cut through the air. • Tool-Free Quick-Grip mounting system attaches box to rack in less than 5 minutes. • SecureLock ensures that all gear is locked and box is properly closed prior to driving • Dual-Side opening for easier loading and unloading from either side of the vehicle • 2 One-Key Locks (included) secure box contents and lock the box to the carrier • Low-profile design provides greater garage access without sacrificing box capacity • Fits Thule rack systems, round bars and most factory racks • Volume: 17 cubic feet • Dimensions (L x W x H): 84 x 34.5 x 17 inches • Weight: 44 pounds
Transport your bicycle quickly and safely with this lockable fork mounted carrier. Not compatible with Thule Aeroblade bars. - Easy-to-use stainless-steel skewer with oversized lever makes for secure loading and unloading - High-strength nylon composite head - Ratcheting wheel strap quickly secures back wheel to tray - Versatile design compatible with standard 9mm axles and most disc brakes. - Carries bikes with wheelbases up to 48" and tire widths up to 2.6". Even works with high profile rims - Carries 1 bike - 1 One-Key lock cylinder (sold separately) locks the bike to carrier and carrier to rack - Fits Thule rack systems or other round bars - Factory rack compatible with Thule Ride-On Adapter (sold separately)
Page 1 of 4 Next page